Clean an undercoat rake by removing trapped hair, hand-cleaning only when needed, drying every part completely, checking for damage, and protecting the teeth in storage.
The current Docrok listing says to clean the rake and comb regularly but does not provide a detailed washing, soaking, disinfecting, or drying method.
Quick Answer: Remove loose hair and visible debris from the rake and comb after grooming. For deeper cleaning, mild soap and warm water are accepted for many comparable metal grooming tools, but Docrok does not publish a confirmed washing or soaking method for this set. Avoid immersing the complete rake or using unapproved chemicals. Remove all residue, dry the metal teeth and handle completely, inspect for damage, and store the tools in a clean, dry place away from children and pets. If a suspected skin infection is involved, stop sharing the tools and ask a veterinarian about an appropriate cleaning or disinfection method.
“Stainless steel” and “rust-resistant” do not mean dishwasher-safe, waterproof, or safe to store damp.
Remove Hair and Debris After Use
Start by removing visible hair, coat oil, flakes, and dirt.
For the rake, clear both sides, check the tooth bases and joint, and pull hair away from the outer ends. A small cleaning brush or the metal comb may help lift trapped hair.
For the comb, slide hair off the tooth ends and check the spine. Avoid sharp picks or force that could bend the teeth.
Use Conservative Hand Cleaning
Because the listing does not confirm a full washing method, avoid soaking or submerging the handled rake.
When residue remains, cautious hand cleaning with a small amount of mild soap and warm water may be reasonable as general tool care, not an official Docrok formula. Remove all residue and limit water around the joint.
The all-metal comb may be easier to hand-clean, but that does not confirm dishwasher or soaking approval.
Do not use bleach, alcohol, vinegar, peroxide, concentrated disinfectants, solvents, boiling water, steam, or a dishwasher unless the manufacturer confirms compatibility. No validated home sterilization process for this set was found.
When tools are shared, remove hair before switching pets. After suspected contagious skin exposure, stop sharing them and ask a veterinarian about an appropriate procedure.
Dry Metal Parts Completely
After damp cleaning, dry both rake surfaces, tooth bases, the handle joint, and both comb sections.
Towel-dry the tools, then leave them ventilated until no dampness remains. Do not seal them away while wet.
The seller describes the teeth as stainless steel and rust-resistant. Those descriptions do not prove that the tools are rust-proof or approved for prolonged water exposure.
Inspect for Damage Before Reuse
Before reuse, inspect the tools in good light. Stop using them if you find:
- bent or loose teeth;
- rough or sharp-feeling areas;
- cracks or looseness near the joint;
- pitting, discoloration, or visible corrosion;
- damage that changes how the tool moves through the coat.
Do not bend damaged teeth back at home or test a damaged tool on the pet.
Store Clean, Dry, and Protected
Store the clean, dry tools in a ventilated place away from moisture, children, pets, and dirty equipment.
A dry pouch, divided box, or protected drawer can help prevent bent teeth and snags. Do not place heavy items on the tools.
You can view the Docrok grooming brush and metal comb combo to see the separate rake and comb components that need cleaning and inspection.
Final Takeaway
Remove hair first, clean conservatively, dry completely, inspect before reuse, and store the tools protected. Avoid unconfirmed soaking, dishwasher use, strong chemicals, and sterilization claims.
As an Amazon Associate I earn from qualifying purchases.
